Growing food in water instead of dirt. This chapter sits beside the garden but is not part of it, because nothing here is soil based. Done right, water growing gives you faster harvests, bigger yields in less space, year round crops indoors, and clean greens with no weeding and almost no pests. Done wrong, it is a tank of warm water that rots roots and grows slime. The difference is understanding three things cold: the system that holds the water, the light that feeds the leaves, and the chemistry of the water itself. Learn those three and you can build any rig in this chapter from parts, pipe, pots, and foam.
Hydro Crops · FoundationsWater vs Soil
13.1 What Water Growing Is
Soil is just a way to hold water, air, and food around a root. Take the soil away and deliver those three directly, and the plant grows faster.
[ Plate 13.1: a clean hydroponic rack of lettuce in net pots beside a traditional soil garden bed, the two shown side by side ]
DifficultyBeginner to Advanced
TimeOngoing
CostLow to High
SkillsPlumbing, patience, record keeping
The three things a root needs
Strip away the romance and a plant root wants exactly three things: water, dissolved oxygen, and mineral food (the nutrients). Soil holds all three in its spaces. Hydroponics hands them to the root directly in moving, oxygenated, fertilized water. Because the plant spends no energy pushing roots through dirt to hunt for food, it puts that energy into leaves and fruit. That is why a hydroponic lettuce can be ready in half the time of a soil one.
What it is good for, and not
Great at: leafy greens, lettuce, herbs, spinach, kale, chard, strawberries, tomatoes, peppers, cucumbers. Anything you harvest the leaves or fruit of.
Poor at: root crops (potatoes, carrots, beets) and grains. If you eat the root or need acres of calories, grow those in soil.
Wins: less water used (it recirculates), no weeding, fewer soil pests, grows indoors and in winter, stacks vertically in small space.
Costs: depends on a pump and power (most systems), needs steady attention, and a power or pump failure can kill a crop in hours on a hot day.
Start here If you have never done this, build one Kratky jar (13.9) and one deep water culture tub (13.3) before anything else. They teach you the water and cost almost nothing. Everything fancier is a variation on what those two teach.
Hydro Crops · The SystemsOverview
13.2 The Six Core Systems
Every hydroponic rig ever built is one of six ideas, or a mix of them. Learn the six and you have seen them all.
[ Fig 13.2: six labeled line diagrams side by side: Wick, Deep Water Culture, Ebb and Flow, Nutrient Film, Drip, Aeroponics, each showing water path and roots ]
The six, in one line each
Wick: a rope carries water up to the roots by itself. No pump, no power. Simplest and slowest.
Deep Water Culture (DWC): roots hang straight down into a tub of aerated water. An air pump keeps it alive. Cheap, fast, forgiving.
Ebb and Flow (Flood and Drain): a tray of plants floods with water on a timer, then drains back to a tank. Roots get food, then air.
Nutrient Film Technique (NFT): a thin film of water runs down a gently sloped channel past bare roots, then back to the tank. Great for greens.
Drip: water drips onto each plant's media from a feed line, excess drains back. The commercial workhorse, scales to any size.
Aeroponics: roots hang in air and are misted with nutrient water. Most oxygen, fastest growth, least forgiving of a failure.
Safety Every powered system shares one deadly flaw: lose the pump and the crop can die fast. Keep a backup air pump and, if you can, a battery or small inverter. Never run electrics over an open water tank without a drip loop in the cord and a GFCI outlet. Water and mains power kill people, not just plants.
Hydro Crops · System 1Deep Water Culture
13.3 Deep Water Culture (DWC)
A net pot in a lid, roots dangling into aerated water. The best first real system there is.
[ Plate 13.3: a cutaway of a DWC bucket: net pot in the lid, clay pebbles, roots in the water, air stone bubbling, air pump outside ]
DifficultyBeginner
Time1 to 2 hours to build
CostLow
SkillsDrilling, basic wiring of a pump
What you need
A food-safe bucket or tote (5 gallon bucket for one big plant, a tote for several).
Net pots that fit holes cut in the lid.
An aquarium air pump, airline, and an air stone.
Clay pebbles (hydroton) or other media to hold the net pot.
Nutrients and a pH kit (see 13.13 and 13.14).
Step by step
Cut the lid. Trace the net pot rim and cut holes so the pots sit with their rims resting on the lid, bodies hanging below.
Set the air. Put the air stone in the bottom, run the airline out over the rim, and connect the pump. The pump sits above the water line or on a shelf so water cannot siphon back into it.
Fill and mix. Fill with water to about an inch below the net pot bottoms. Mix nutrients to strength and set pH (13.14).
Seat the plants. Put a seedling in a net pot, pack clay pebbles around it. The roots should just touch or nearly touch the water; the bubbles keep the top roots wet.
Run it. The air pump runs 24 hours a day. As roots grow down into the water, lower the water level so a few inches of bare root sit in the air gap between pebbles and water. That gap is where the roots breathe.
[ Fig 13.3: the air gap explained: pebbles up top, an inch of humid air, then the water line, roots passing through all three ]
Why it works The bubbles do two jobs: they oxygenate the water so roots do not drown, and they splash the upper roots so they never dry out. Warm water holds less oxygen, so keep the tub below about 72 F (13.13). The number one DWC killer is warm, still, low-oxygen water, which breeds root rot.
Hydro Crops · System 2Wick
13.4 The Wick System
No pump, no power, no moving parts. A rope does the work. The passive beginner rig.
[ Plate 13.4: a two-container wick setup: grow tub on top, reservoir below, wicks of felt rope running from water up into the media ]
DifficultyBeginner
TimeUnder an hour
CostVery low
SkillsNone
How it works
A wick (nylon rope, felt strip, or a strip of old wool blanket) runs from a reservoir of nutrient water up into the grow container's media. Capillary action pulls water up the wick to the roots, the same way a paper towel soaks up a spill. The plant drinks what it needs and the wick keeps replacing it.
Step by step
Stack a grow container on top of a reservoir, or set them side by side with the grow pot's base in the water.
Thread two to four wicks through holes in the grow container so they dangle into the reservoir below and splay up into the media above.
Fill the grow container with a wicking media that holds water well: coco coir, perlite and vermiculite mix, or a coco-perlite blend.
Fill the reservoir with nutrient water, plant your seedling, and let the wick feed it.
Check the reservoir every few days and refill. Flush fresh water through every couple of weeks so salts do not build up in the media.
Best for herbs and small greens that drink slowly. Wicks cannot move water fast enough for a thirsty tomato in full summer. It is the rig to run where there is no electricity at all.
Hydro Crops · System 3Ebb & Flow
13.5 Ebb and Flow (Flood and Drain)
A tray floods with water on a timer, then drains back. Roots feast, then breathe. Rock solid and flexible.
[ Plate 13.5: a flood tray full of potted plants on a stand, a tank underneath, a pump and timer, the fill and overflow tubes shown ]
DifficultyIntermediate
TimeA half day to build
CostMedium
SkillsPlumbing, setting a timer
How it works
A grow tray sits above a reservoir. On a timer, a submersible pump floods the tray with nutrient water up to a set level (an overflow tube caps the height). The pump shuts off and the water drains back down through the pump and overflow by gravity. As the water drains, it pulls fresh air down into the media around the roots. Flood, drain, breathe, repeat, several times a day.
Step by step
Set the tray on a sturdy stand above the reservoir (13.17). Water is heavy; build the stand to hold a full tray.
Install two fittings in the tray floor: a fill tube from the pump, and a taller overflow tube that sets the maximum flood height an inch below the media top.
Fill plants in pots of clay pebbles or a pebble-coco mix, set them in the tray.
Set the timer: a common start is to flood for about 15 minutes, 3 to 6 times during the light hours, and not at all (or once) at night. Watch the plants and adjust.
Confirm the tray fully drains between floods. Standing water that never drains means the roots never breathe.
[ Fig 13.5: the flood cycle in four frames: pump on, flooded, pump off, drained, with arrows showing air pulled in on the drain ]
Why growers love it You can grow almost anything in it, swap plants in and out as pots, and a brief pump failure is not instantly fatal because the media stays damp. The timer is the only brain it needs.
Hydro Crops · System 4Nutrient Film
13.6 Nutrient Film Technique (NFT)
A thin film of water runs down a sloped channel past bare roots. The classic lettuce-and-herb factory.
[ Plate 13.6: a gently sloped PVC channel or square tube with net pots of lettuce in a row, a thin stream running along the bottom past the roots, returning to a tank ]
DifficultyIntermediate
TimeA day to build
CostMedium
SkillsPlumbing, setting a slope
How it works
A pump lifts water to the high end of a sloped channel. A thin film (not a flood, just a shallow stream) runs down the channel floor, wetting the bottom of the root mass while the rest of the roots sit in humid air above the film. At the low end the water drains back to the tank and cycles again, continuously.
Step by step
Use square or round channels (4 inch PVC fence post, or purpose-made NFT channel). Round pipe works but square holds the net pots better.
Drill net-pot holes along the top, spaced for the crop (lettuce about 7 to 9 inches apart).
Set a gentle slope: about a 1 in 30 to 1 in 40 drop (roughly an inch of fall per 3 feet). Too flat and it pools; too steep and the film races past without feeding.
Pump a small, steady flow to the top (about 1 quart per minute per channel is a common starting point). Return the low end to the tank.
Start seedlings in small media plugs (rockwool or coco), set them in the net pots so the first roots reach the film.
Watch for NFT lives and dies by the pump: no media to hold water means roots dry out within minutes of a stoppage. Keep channels short enough that the film does not warm up or run out of oxygen before the far end. Not for big heavy fruiting plants, whose roots clog the channel.
Hydro Crops · System 5Drip
13.7 Drip Systems
A feed line drips nutrient water onto each plant. The commercial standard, and it scales from one pot to an acre.
[ Plate 13.7: a row of media-filled pots or grow bags, a main feed line with a small drip emitter staked into each pot, excess draining to a return channel ]
DifficultyIntermediate
TimeA day
CostMedium
SkillsPlumbing, emitter sizing
How it works
A pump pushes water through a main line to a small emitter staked into each plant's media. The media (coco, pebbles, rockwool) holds the moisture; the drip tops it up on a timer. In a recovery drip the runoff returns to the tank; in a non-recovery drip it drains to waste (simpler, but wastes nutrient). For a homestead, build recovery.
Step by step
Fill plants in pots or grow bags of media on a slightly sloped tray or trough that drains to the tank.
Run a main line from the pump along the row; punch in a short feeder and an emitter at each plant.
Match emitter flow to plant size (a big tomato wants more than a small herb). Pressure-compensating emitters keep every plant fed evenly down a long line.
Set the timer for several short feeds across the light period; media should stay damp, never swamped or bone dry.
Flush emitters regularly; mineral salts and roots clog them. Keep spares.
Why it scales Add more line, more emitters, more pots. Drip is how most greenhouse tomatoes and peppers on earth are grown. Clogging is its only real chronic headache, so filter the water before the emitters.
Hydro Crops · System 6Aeroponics
13.8 Aeroponics
Roots hang in open air inside a sealed chamber and are misted with nutrient water. The fastest growth, the least forgiving.
[ Plate 13.8: a sealed chamber with plants in the lid, roots dangling in the dark interior, mist nozzles spraying them, pump and tank below ]
DifficultyAdvanced
TimeA day+
CostMedium to High
SkillsPumps, nozzles, pressure
How it works
Plants sit in a lid with their roots hanging into a closed, dark chamber. A pump drives nutrient water through fine nozzles that mist the roots, on a short cycle (seconds on, a minute or two off) or continuously with low-pressure foggers. Because the roots are mostly in air, they get more oxygen than any other method, so growth is very fast.
Step by step
Build or buy a sealed, light-proof chamber (a tote works). Light inside grows algae and rots roots, so keep it dark.
Mount mist nozzles inside, fed by a pump from the tank below. Low-pressure (pump-driven) is easier; high-pressure (with an accumulator) atomizes finer and grows faster but is fussier.
Set plants in the lid with roots dangling into the chamber. Early seedlings may need a little media plug until roots reach the mist.
Run the mist on a cycle timer. Tune so roots are always damp but never sitting in pooled water.
Keep nozzles spotless; a clogged nozzle dries its plant in minutes.
Safety Aeroponics is the highest-risk system for a crop. A clogged nozzle, a tripped pump, or a power cut dries exposed roots within minutes. Run it only with alarms or backup power, and only once the simpler systems are second nature.
Hydro Crops · PassiveKratky
13.9 The Kratky Method (No Pump at All)
Fill a jar once, plant it, walk away. The plant drinks the water down and grows into the air gap it leaves behind.
[ Plate 13.9: a mason jar or tub with a net pot in the lid, the water level dropped well below the pot, a long air gap, roots spanning water and air ]
DifficultyBeginner
TimeMinutes
CostVery low
SkillsNone
How it works
Kratky is DWC with no air pump. You fill a sealed container with nutrient water up to the net pot, plant a seedling, and never add water again for the whole crop. As the plant drinks, the water level drops, leaving a growing air gap. The lower roots stay in water to drink; the upper roots, now exposed in the humid gap, become air roots and breathe. By harvest the jar is nearly empty.
Step by step
Take any opaque container with a lid (paint the glass or use a dark tub; light grows algae).
Cut a net-pot hole in the lid. Seat a seedling in a little media in the net pot.
Fill with nutrient water so it just touches the bottom of the net pot and the first roots.
Close it up and set it under light. Do not top up the water. Let the level fall on its own.
Harvest when ready. Scale it up to a tote for several lettuces at once.
Why every beginner should build one No power, no timer, no pump to fail, almost no cost. It proves the whole principle in a jar on a windowsill. Best for fast greens and herbs that finish before the water runs out; not for long-season tomatoes.
Hydro Crops · Living SystemAquaponics
13.10 Aquaponics (Fish and Plants Together)
Fish feed the plants, plants clean the water for the fish, and bacteria make the deal work. One loop, two harvests.
[ Plate 13.10: the full loop: a fish tank, a pump up to a grow bed of plants, water falling back clean to the fish, bacteria labeled on the media ]
DifficultyAdvanced
TimeWeeks to cycle
CostMedium to High
SkillsFishkeeping, water testing, patience
The nitrogen cycle, which is the whole thing
Fish produce ammonia in their waste. Ammonia is toxic to fish. Beneficial bacteria living on the surfaces of the grow bed convert ammonia first to nitrite (still toxic), then to nitrate, which is exactly the nitrogen food plants want. The plants drink the nitrate and hand back clean water to the fish. No bacteria, no aquaponics. Growing those bacteria in before you add many fish is called cycling, and it takes several weeks.
Step by step
Build the loop: a fish tank, a pump lifting water to a grow bed (often a media bed of clay pebbles, or rafts of foam with net pots), and a gravity return to the tank.
Cycle it first. Run the water with a pinch of ammonia source for 3 to 6 weeks, testing until ammonia and nitrite spike and then fall to near zero while nitrate rises. That means the bacteria have colonized.
Add fish slowly. Tilapia (warm) and trout (cold) are classic for eating; goldfish or koi if you just want the fertilizer. Stock lightly at first.
Feed the fish, not the plants. Fish food is the input; the plants eat the fish waste. You add almost no plant nutrients, only sometimes iron, potassium, and calcium that fish waste runs short on.
Hold the pH in the shared range. Fish, bacteria, and plants all have to live in one pH; aim around 6.8 to 7.0, a compromise none of them loves but all can take.
[ Fig 13.10: the nitrogen cycle as a ring: fish to ammonia to nitrite to nitrate to plant to clean water to fish ]
Safety & the catch You now keep livestock. A power cut stops the pump and can suffocate the fish and starve the bacteria in hours, so a battery-backed air pump is not optional. Never use pesticides near the system; what kills a bug kills your fish. It is the most rewarding and the most demanding rig in this chapter. Cross-reference Chapter Five for raising the fish themselves.
Hydro Crops · LightFeeding the Leaves
13.11 Lighting
Water feeds the roots; light feeds the leaves. Indoors, the light is the sun's whole job, and getting it wrong starves the crop as surely as no food.
[ Plate 13.11: three light types over grow benches: a sunny window, long T5 fluorescent tubes, and an LED panel on adjustable hangers, with a par/height note ]
DifficultyBeginner to Intermediate
TimeSetup once
CostLow to High
SkillsWiring a timer, measuring height
The four things light has
Intensity (how bright, measured as PAR / PPFD): too little and plants stretch pale and weak; too much and leaves bleach and burn.
Spectrum (the color mix): plants mainly use blue (leafy, compact growth) and red (flowering and fruiting). Full-spectrum white LEDs cover both.
Duration (hours per day, the photoperiod): greens and herbs do well on 14 to 16 hours. Fruiting plants and day-length-sensitive crops care about the dark period too.
Distance (hang height): too close burns, too far wastes light and stretches plants. Every fixture has a recommended height; start there.
The common light types
Sunlight / a south window: free, but short and weak in a northern winter. Fine for herbs, not enough for winter fruiting.
T5 fluorescent tubes: cheap, cool, gentle. Perfect for seedlings and leafy greens hung a few inches above the canopy.
HID (MH / HPS): old commercial standard. Metal halide (blue) for growth, high-pressure sodium (red/orange) for flower. Very bright, but hot and power-hungry; being replaced by LED.
LED panels / bars: today's best choice for most growers. Efficient, cool, long-lived, full spectrum, dimmable. Costs more up front, pays back in power and heat saved.
Setting it up
Hang the fixture on adjustable ratchet hangers so you can raise it as plants grow and keep the right distance.
Put it on a timer. Consistency matters more than perfection; the same on/off time every day.
Start greens at 14 to 16 hours of light. For fruiting plants, give strong light and follow the crop's day-length needs.
Watch the plants: stretching and reaching means too little or too far; bleaching, curling, and bleached tops mean too much or too close. Adjust height, not panic.
Safety Grow lights pull real power and make real heat. Use rated cords and outlets, keep hot HID bulbs away from anything that melts or burns, and never let a fixture touch water. Give the room ventilation; heat and humidity build up fast under lights.
Hydro Crops · MediaWhat Holds the Root
13.12 Grow Media, Net Pots & Foam
Without soil, something still has to hold the plant up and cradle the first roots. That is the media, the net pot, and the raft.
[ Fig 13.12: a labeled lineup: clay pebbles, rockwool cube, coco coir, perlite, net pot, and a styrofoam raft with net-pot holes ]
The media, and where each shines
Clay pebbles (hydroton / LECA): round baked-clay balls. Rinse-and-reuse, great airflow, perfect for DWC, ebb and flow, and media beds. Does not hold much water on its own.
Rockwool: spun stone fiber cubes. The seed-starting and NFT standard; holds water and air beautifully. Wear a mask handling it dry, and pre-soak to the right pH before use.
Coco coir: ground coconut husk. Renewable, holds water well, forgiving; buffer and rinse it first because raw coir holds salt. Great in drip and wick systems.
Perlite & vermiculite: puffed volcanic glass and mineral. Light, airy, cheap; usually mixed with coco. Perlite for air, vermiculite for water; blend to taste.
Styrofoam rafts: sheets of food-safe closed-cell foam floated on a deep tank, net pots dropped through holes. This is the classic raft or float bed for lettuce at scale; the foam insulates the water and holds every plant at the perfect height.
Net pots and how they are used
A net pot is a mesh-walled cup that lets roots grow straight out the sides and bottom into water or mist. You fill it with a little media to steady the seedling, then let the roots escape. Match the net pot size to the hole in your lid, channel, or raft. For rafts and foam, the net pot rim rests on the foam so the plant rides at a set depth as the foam floats.
Reuse and clean Clay pebbles and net pots clean up and last for years: rinse, then soak in a mild bleach or hydrogen peroxide solution between crops, then rinse again. Rockwool and coco are usually one-crop. Never reuse media that grew a diseased plant.
Hydro Crops · The WaterTemperature, Oxygen, Salinity
13.13 Water Chemistry: The Part Most People Get Wrong
The water is not a backdrop; it is the whole farm. Four numbers run it: temperature, oxygen, strength (EC/salinity), and pH.
[ Plate 13.13: a tidy test bench: EC/PPM meter, pH meter and drops, thermometer, and a chart of target ranges ]
DifficultyThe core skill
TimeMinutes a day
CostLow (meters)
SkillsReading meters, keeping a log
Water temperature
Aim for roughly 65 to 72 F (18 to 22 C) at the roots. Warm water holds far less dissolved oxygen and breeds root rot; cold water slows growth and shocks roots. In summer, a frozen bottle floated in the tank or a small chiller holds it down; in winter, an aquarium heater holds it up.
Dissolved oxygen
Roots breathe oxygen dissolved in the water. Moving, bubbling, falling water holds oxygen; still warm water does not. This is why DWC bubbles, NFT films are thin, and ebb and flow drains. Low oxygen is the hidden cause behind most mysterious root deaths.
Strength and salinity: EC and PPM
Nutrients are mineral salts dissolved in the water. A meter reads that dissolved-salt level as EC (electrical conductivity) or PPM (parts per million); they measure the same thing two ways. This is your "salinity" in the growing sense.
Seedlings / light feeders: low strength, roughly EC 0.8 to 1.2 (about 400 to 600 PPM).
Leafy greens: EC 1.2 to 1.8 (600 to 900 PPM).
Fruiting (tomato, pepper, cucumber): EC 2.0 to 3.5 (1000 to 1750 PPM).
Too high (over-salted) burns roots and wilts the plant even in full water, because the salt pulls water back out of the roots. Too low starves it. When in doubt, run a little weak; you can always add more.
Start with clean, low-mineral water if you can (rain or RO water reads near 0 EC, so every point you add is nutrient you chose). Hard tap water already carries minerals, which stacks on top of what you add.
The daily truth Plants drink water faster than they eat nutrients, so as the tank drops, the salt that is left gets more concentrated: EC climbs and pH drifts on its own. That is why you check daily and top up with plain pH-set water, not more full-strength mix, then correct. A written log of EC, pH, temp, and top-ups is the single habit that separates good water growers from frustrated ones.
Hydro Crops · The WaterpH & Nutrients
13.14 pH and Mixing the Nutrients
Even perfect food is locked away from the plant if the pH is wrong. Set the strength first, then set the pH.
[ Fig 13.14: a pH scale strip marked with the 5.5 to 6.5 hydroponic sweet spot, and the "nutrient lockout" zones at each end ]
Why pH rules everything
pH measures how acidic or basic the water is, 0 to 14, with 7 neutral. Each nutrient can only be absorbed by the root inside a certain pH window. Drift out of range and the nutrient is still in the water but locked out, unavailable, so the plant shows a deficiency while surrounded by food. For most hydroponic crops the sweet spot is pH 5.5 to 6.5 (aquaponics runs a touch higher, near 6.8 to 7.0, to keep the fish and bacteria happy).
Step by step: mixing a batch
Start with your base water and read its EC and pH so you know what you are building on.
Add nutrients to strength first. Follow the product's schedule for your crop and stage; add, stir, and read the EC. Adjust until you hit the target from 13.13. Adding nutrients changes pH, which is why strength comes first.
Now set the pH. Use pH Down (usually phosphoric acid) or pH Up (usually potassium hydroxide) a little at a time, stir, wait, and re-read. Creep up on the number; it is easy to overshoot.
Two-part or three-part nutrients: add each part separately to the water, never pour concentrates together, or they react and form solids that fall out useless.
Re-check after a few hours and again daily. pH naturally drifts as plants feed.
Meters A cheap EC pen and pH pen pay for themselves in one saved crop. Calibrate the pH pen against buffer solution regularly; an uncalibrated meter lies, and you will chase problems that are not there. Keep pH Up/Down, calibration fluid, and a log sheet together as a kit.
Hydro Crops · BuildStands, Tubing, Towers, Hangs
13.15 Building the Structure
Water is heavy and gravity is free. A good stand and the right pipe turn a pile of parts into a farm that runs itself downhill.
[ Fig 13.15: four builds side by side: an A-frame NFT stand, a vertical hanging tower, a PVC pipe rack on legs, and a raft tank, each labeled with pipe and fitting sizes ]
DifficultyIntermediate
TimeA weekend
CostLow to Medium
SkillsCarpentry, PVC cutting and gluing
Stands and frames
The rule: a full tank or flooded tray is extremely heavy (water is about 8.3 pounds a gallon). Overbuild the stand. Level it dead flat for raft and ebb tables; set a deliberate slight slope for NFT channels.
A-frame: channels stepped down both sides of a peak, pump to the top, gravity feeds every level back to one tank. Doubles your plants in the same floor space.
Benches: simple sturdy tables at working height for rafts and ebb trays. Build to the height of the tank that lives beneath.
Vertical towers: stacked pots or a slotted pipe stood upright; water pumped to the top trickles down through every plant. Most crops per square foot of any method. Great under a central hanging light.
Tubing and plumbing
PVC pipe (3 to 4 inch) for NFT channels and towers; vinyl tubing for pump feeds and returns; uniseal or bulkhead fittings where a pipe passes through a tank wall.
Keep feed lines short and returns gently sloped so gravity does the draining. Put a filter/strainer on the pump intake and before any emitters.
Build a drip loop into every power cord (a low hang so water runs off the loop, not down into the outlet).
Use food-safe, opaque pipe and tanks. Clear pipe grows algae in the light; dark pipe stays clean.
Hangs and pots
Hanging: suspend towers, light fixtures, and even whole channels from ceiling hooks or a frame on ratchet hangers so heights adjust as plants grow.
Pots & net pots: net pots for water systems, solid pots of media for drip and ebb. Match pot size to plant size.
Rafts: foam sheets floated on a deep raft tank, net pots through the holes; the simplest big-lettuce builder there is.
Design downhill The best systems are mostly gravity: pump lifts water once to the high point, and it feeds everything on the way back down to the tank. Fewer pumps, fewer failure points, lower power bill.
Hydro Crops · GrowingSeedlings & Crop Choice
13.16 Starting Seeds and Choosing Crops
You still start from a seed. The trick is starting it in media that moves cleanly into a water system.
[ Plate 13.16: a tray of rockwool and coco plugs with seedlings at different stages, roots just emerging, ready to transplant into net pots ]
Starting the seedlings
Sow into plugs: rockwool cubes, coco plugs, or peat-free starter cubes, pre-soaked to the right pH.
Keep them warm, humid (a dome helps), and under gentle light (T5 or a low LED) until they sprout and show the first true leaves.
Keep the plugs moist with weak (quarter-strength) nutrient water, not plain water, once true leaves appear.
When white roots poke out the bottom of the plug, set the whole plug into a net pot and into the system. No washing, no shock.
What grows well, by system
Lettuce, greens, herbs: any system; rafts, NFT, Kratky, and DWC are ideal. The easiest wins.
Tomatoes, peppers, cucumbers: drip or ebb and flow in media pots, with strong light and a trellis; heavy feeders (high EC).
Strawberries: vertical towers and NFT, a favorite for stacking.
Skip: potatoes, carrots, corn, and grain. Grow those in Chapter Five's soil garden.
Succession Because a hydro crop finishes fast, start a new tray every week or two so a steady supply keeps coming, the water-growing version of the garden's succession planting.
Hydro Crops · Keeping It AliveMaintenance
13.17 Proper Maintenance, Done on Schedule
A water farm is a small machine with living parts. It rewards a routine and punishes neglect faster than any soil garden.
[ Fig 13.17: a maintenance calendar: a daily row, a weekly row, a per-crop row, each with its checklist icons ]
Daily (a few minutes)
Check the pump and air pump are running and water is moving.
Read water temperature; cool or warm if out of range.
Glance at the plants for wilt, yellowing, or pests.
Top up the tank with pH-set plain water as the level drops.
Every few days
Test and log EC/PPM and pH; correct back to target.
Clear any clogged emitters or nozzles.
Wipe algae off anything the light reaches.
Weekly to biweekly
Change or refresh the reservoir fully (dump, rinse, mix a new batch). Salts and junk build up no matter how careful the top-ups.
Check roots: healthy roots are white or cream and smell clean; brown, slimy, foul-smelling roots are root rot.
Clean filters and pump intakes.
Between crops
Tear down and scrub everything: tanks, channels, net pots, pebbles.
Sterilize with a mild bleach or hydrogen peroxide solution, then rinse well and dry.
Replace one-use media (rockwool, coco). Never carry disease from one crop to the next.
Root rot, the main enemy Brown slimy roots and a swampy smell mean low oxygen and warm water let the wrong microbes take over. Fix the cause: cool the water, boost aeration, clean the system, and some growers add beneficial microbes or a measured dose of hydrogen peroxide. Prevention (cool, oxygenated, clean water) beats every cure.
Hydro Crops · ProblemsTroubleshooting
13.18 Reading the Plant and Fixing It
The plant tells you what is wrong if you know the signs. Most problems trace back to the same few causes.
[ Fig 13.18: a leaf-symptom chart: yellowing patterns, curling, bleaching, spots, each pointing to a likely cause ]
Common signs and likely causes
Yellowing older/lower leaves: usually nitrogen low, or pH lockout. Check EC and pH.
Yellow between the veins on new leaves: often iron or magnesium, common when pH is too high (lockout) or in aquaponics.
Wilting with plenty of water in the tank: EC too high (salt pulling water out of roots), or warm low-oxygen water and root rot, or the pump stopped.
Pale, stretched, reaching plants: not enough light, or the light is too far away.
Bleached, curled, crispy tops: light too intense or too close; raise the fixture.
Brown, slimy, stinking roots: root rot from warm, still, low-oxygen water. See 13.17.
Algae (green slime) everywhere light hits water: block the light; cover tanks and use opaque pipe.
The troubleshooting order
Is the pump running and water moving? Fix that first.
Check pH. More "deficiencies" are lockout from bad pH than actual missing nutrients.
Check EC. Too high or too low both look like sickness.
Check water temp and oxygen. Warm still water is behind most root trouble.
Only after those four, start thinking about specific nutrient deficiencies and pests.
Change one thing at a time When you fix, change a single variable and wait a day or two to read the result. Changing four things at once means you never learn which one mattered.
Hydro Crops · ProtectPests, Cleanliness & Safety
13.19 Pests, Cleanliness, and Staying Safe
Fewer pests than soil, but not none. And a water farm wired for power has its own hard safety rules.
[ Plate 13.19: a clean indoor grow space: sticky traps hung, a GFCI outlet, drip loops in the cords, covered tanks, a mesh screen on the vent ]
Pests, the water-growing short list
Aphids, spider mites, whiteflies, fungus gnats, thrips still find indoor plants. Catch them early with yellow sticky cards and a weekly close look at leaf undersides.
Control gently: hand-removal, a strong water rinse, insecticidal soap or neem on the leaves (keep any spray out of the tank), and beneficial insects like ladybugs in a greenhouse.
In aquaponics, almost nothing you spray is safe, because it reaches the fish. Rely on screens, traps, hand-removal, and beneficial bugs only.
Keep it clean: most trouble walks in on dirty hands, reused media, or an infected new plant. Quarantine new plants; wash up before you work.
Electrical and water safety (non-negotiable)
Every powered system runs on a GFCI outlet. Water plus mains power can kill.
Drip loops in every cord so water drips off the loop, never into the outlet.
Keep pumps, timers, and ballasts above the water line or on a shelf.
Mind weight: a full tank or flooded table can collapse a weak stand and flood a room. Build strong, and keep water off the floor where you stand.
Ventilate: lights and standing water drive heat and humidity up fast, which rots the room and breeds mold if air does not move.
Backup power The one failure that wipes a crop (and in aquaponics, kills fish) in hours is a dead pump. A cheap battery-backed air pump, a UPS, or a small inverter is the difference between a hiccup and a total loss. Treat it as part of the build, not an extra.
Hydro Crops · The PlanYour First Build
13.20 Putting It All Together
Everything in this chapter folds into one honest path: start tiny, learn the water, then scale.
[ Plate 13.20: a finished small home hydro corner: a Kratky jar, a DWC tote, a raft tank of lettuce, and a drip-fed tomato, all under one adjustable LED, beside the soil garden ]
The order to build, start to farm
Week one: a Kratky jar (13.9) and a DWC tote (13.3) of lettuce under a cheap light. Learn pH, EC, and the daily check on crops you can afford to lose.
Then: a raft tank or an ebb and flow table (13.5) for a real supply of greens.
Then: NFT channels or a vertical tower (13.6, 13.15) once you trust your pump habits.
Then, if you want fruit: a drip system (13.7) in media for tomatoes and peppers under strong light.
The long goal: aquaponics (13.10), when you are ready to keep fish and run the loop.
How this sits beside the garden
Hydro Crops is the water wing of the homestead's food. The soil garden (Chapter Five) grows your calories, roots, and storage crops; the water farm grows fast, clean greens, herbs, and fruit in small space, indoors, and through winter when the ground is frozen. Run both and the table is never bare. Neither depends on the other, and that is the whole homestead rule: never lean on a single source.
The one sentence to remember Master the water (cool, oxygenated, right EC, right pH) and the light (bright enough, close enough, long enough), keep it clean, and back up the pump. Every rig in this chapter is just a different way of doing those few things well.